Your Jaybird Tarah earbuds come with a directional charging cradle. To charge your earbuds, follow the steps below:
1. Plug the USB charging cable, that came with your Tarah earbuds, into a USB power source.
2. Align the two gold coloured contact points on the charging cradle with the two contacts on the inline remote. Press the inline remote onto the charging cradle until you hear it snap into place. You will see the LED on the inline remote start pulsing white, which indicates that your Tarah earbuds are now charging.
3. The LED on the inline remote will stop pulsing once the earbuds are fully charged. We do not recommend leaving your Tarah earbuds on the charger for more than 5 hours. To prolong the lifetime of your battery we recommend charging your earbuds when you hear the “Charge Me” voice prompt (which corresponds to about 10% battery charge remaining).
4. If your Tarah earbuds are very low on charge and you are pressed for time you can partially charge your earbuds, and should get an extra hour of music playtime for 10 minutes of charging.
When turned on and not playing music, pressing Volume + or Volume – will announce the battery level. If you download and connect to the Jaybird app you will be able to see your battery level to within 1%.
NOTE: Make sure to check the capacity of the charging source before you begin charging. We recommend using a computer as it’s the best and safest method. Any charger with a charging current of 1 Amp or less is safe. Some chargers can produce a lot more power than is needed to charge your earbuds and we do not recommend using them.